Filter
Top Products
The zero point is 1.5 mm or 0.060 inches from the bottom of
the supply. The bottom of the supply is the edge that exits the
printer first.
This value is measured in tenths of millimeters (TOMMS) and
must be less than the maximum length of the supply.
Values: 0-2032
NOTE: The minimum row location for serial bar code fields is
23 (0.09 inches)
COL One to four digits to define the column location of the field on
the supply. This is the distance from the guide edge zero
point at the left edge of the supply and the left edge of the
field.
The zero point is 1.5 mm or 0.060 inches from the left edge of
the supply.
The unit of measurement is tenths of millimeters. The range
must be less than the maximum width of the supply.
Values: 0-1016 (0 to 4 inches)
DENSITY One digit for the bar code density for Interleaved 2 of 5, Code
128, MSI, Code 39, and UPC/EAN bar codes.
Values: 1-5
Some bar codes do not support all 5 values.
For the actual densities for these values, see Chapter 5,
"Quick References."
BFONT One digit indicating which bar code font to use.
Values: 1 UPC-A
2 UPC-E
3 Interleaved 2 of 5
4 Code 39
5 Codabar
6 EAN-8
7 EAN-13
8 Code 128
9 MSI
10 UPC/EAN+2
11 UPC/EAN+5
Message Structures 3-13