Filter
Top Products
Diagnostic Messages
These messages appear if the printer fails internal testing. If the
printer stops at one of these messages, turn the power off. Then
turn it on again. If the problem persists, call Monarch Service.
Message
Error - Turn power off
Wait 10 seconds, then turn on
Head test failure
RAM read/write failure.
ROM checksum failure.
Startup Messages
The printer displays the following messages when you turn the
power on. Messages are listed in the order they appear.
If the printer stops at one of these messages, turn the power off.
Wait at least 10 seconds, then turn it on again. If the problem
persists, call Monarch Service.
Message Description/Action
Copyright (c) 1988-89
Monarch Marking (Model 94##)
A copyright statement for
the software.
Select Supply Type:
B
A)lign, B)lack Mark or D)ie Cut
Press e if you are
using black mark or
aperture supplies.
Type D and press e if
you are using die cut
supplies.
Type A and press e
to calibrate the printer.
6-2 Error Messages