Filter
Top Products
Setting Supply Options 3-5
3. Press L or R to change the print position. Pressing L decreases the
value (moves the image down); R increases it (moves the image up).
4.
Press E when the number you need appears. Press U twice to exit
to the Main menu.
Supply Position
This function adjusts how much supply feeds out of the exit chute. You may
need to adjust the supply in or out to allow
♦ labels to be removed.
♦ die cut labels to be removed easily.
The adjustments are in dots (0.0033 inch).
♦ Increase the number to feed more supply out of the chute.
♦ Decrease the number to feed less supply out of the chute.
This option takes effect on the next label printed. Changing supply position
may also affect print position.
To change the setting, from the Main Menu, select Setup, then Supply.
Then, follow these steps.
1.
Press L or R until you see
2.
Press E. You will see the current setting, for example:
3.
Press L or R to change the supply position. Pressing L decreases
the value (feeds less supply); R increases it (feeds more supply).
SUPPLY
l Supply Pos r
Enter supply pos
[-300/300]: +0