Filter
Top Products
Communication Values 4-3
Stop Bits
To change the setting, from the Main Menu, select Setup, Port Settings,
then User Comm. Then, follow these steps.
1.
Press L or R until you see
2.
Press E . You will see the current setting, for example:
3.
Press L or R to display the number of stop bits you need, press E.
Press U three times to exit to the Main menu.
Parity
To change the setting, from the Main Menu, select Setup, Port Settings,
then User Comm. Then, follow these steps.
1.
Press L or R until you see
2.
Press E. You will see the current setting, for example:
3.
Press L or R to display the parity you need, press E. Press U
three times to exit to the Main menu.
USER COMM
l Stopbits r
STOPBITS
1 r
USER COMM
l Parity r
PARITY
None r