Filter
Top Products
3-6 Setting Supply Options
4. Press E when the number you need appears. Press U twice to exit
to the Main menu.
Margin Position
This function adjusts where the format prints horizontally on the supply. The
adjustments are in dots (0.0033 inch), which is the smallest measurement
the printer recognizes.
The width of the print area depends on your supply size. Maximum width is
six inches. When you move the image to the right or left on the supply,
avoid moving the image too close to either edge, because it may not print.
Print too far to the left. Print too far to the right.
♦ If the data is too close to the left side, increase the number.
♦ If the data is too close to the right side, decrease the number.
Changing this setting only affects new formats sent to
the printer.
To change the setting, from the Main Menu, select Setup, then Supply.
Then, follow these steps.
1.
Press L or R until you see
SUPPLY
l Margin Pos r