Filter
Top Products
Setting Supply Options 3-7
2. Press E. You will see the current setting, for example:
3.
Press L or R to change the margin position. Pressing L decreases
the value (moves the image toward the left side of the supply); R
increases it (moves the image toward the right side of the supply).
4.
Press E when the number you need appears. Press e twice to
exit to the Main menu.
Cut Position
Changing these settings do not affect the printer’s operation.
Supply Type
You can print on black mark, die cut, or continuous supplies. You have to
tell the printer which supplies you are using.
To change the setting, from the Main Menu, select Setup, then Supply.
Then, follow these steps.
1.
Press L or R until you see
2.
Press E to set the supply type option. You will see the current
setting, for example:
3.
Press L or R to see the other options. After you display the option you
want, press E. Press U twice to exit to the Main menu.
Enter margin pos
[-99/99]: +0
SUPPLY
l Supply Type r
SUPPLY TYPE
l Black Mark r