Filter
Top Products
4-4 Communication Values
Flow Control
To change the setting, from the Main Menu, select Setup, Port Settings,
then User Comm. Then, follow these steps.
1.
Press L or R until you see
2.
Press E. You will see the current setting, for example:
The XON character is 17; XOFF is 19. Set flow control to DTR for PC
computers (unless you have XON/XOFF software).
3.
Press L or R to display the flow control you need, press E. Press
U three times to exit to the Main menu.
Reset to Default Values
To change the setting, from the Main Menu, select Setup, Port Settings,
then User Comm. Then, follow these steps.
1.
Press R until you see
2.
Press E. You will see
3.
Press L or R to make your selection, press E. Press U three times
to exit to the Main Menu.
USER COMM
l Flow Control r
FLOW CONTROL
l DTR r
USER COMM
l Reset
Are you sure?
No r