Filter
Top Products
1-4 Operator’s Handbook
Attaching the Safety Strap
1. Turn the printer upside down, resting its top on the table.
2. Remove the stylus strap from the loop.
3. Take the thin end of the safety strap, and push it through the loop at
the bottom of the printer handle (near the battery compartment).
4. Push the thick end of the safety strap through the thin end’s loop.
5. Pull the strap. It may be necessary to help the thin end’s loop fit over
the plastic piece in the middle of the strap and pull the strap tight.
6. Attach the stylus strap to the loop as shown.