Filter
Top Products
Using Supplies 3-5
7. Hold the backing paper edge between the feed and pinch rollers, and
press the trigger.
8. Close the cover.
9. Tap Load Supply from the printer icon menu, then Calibrate.
Loading for Non-Peel Mode
To load supplies for non-peel mode:
1. Feed the supply under the applicator roller and over the label
deflector.
2. Close the supply cover.
3. Tap Load Supply from the printer icon menu, then Calibrate.
Guide Roller
(behind supply)
Feed Roller
(behind Pinch Roller)
Pinch Roller
Applicator Roller
Label Deflector