Filter
Top Products
5-6 Operator’s Handbook
Clearing Supply Jams
To clear a supply jam:
1. Turn off the printer and open the supply cover completely.
2. Open the label deflector by gently pressing down on it with two
fingers.
3. Remove the supplies. See “Removing Supplies” in Chapter 3 for
more information.
4. Carefully remove any jammed supply and close the deflector.
Note: Do not pull the jammed supply out through the front of the label
deflector. Do not use sharp objects to remove jammed supplies.
5. Carefully remove
any jammed supply
between the pinch
and feed rollers.
6. Clean any adhesive
build-up.
7. Reload the supplies
and close the label
deflector.
Storing the Printer
Do not store the printer in or near
♦ magnetic fields
♦ wet or damp areas
♦ dirty or dusty areas
♦ areas of intense vibration or shock.
Feed Roller
(behind Pinch Roller)
Pinch Roller