Filter
Top Products
5-2 Operator’s Handbook
Cleaning the Printhead
Clean the printhead
♦ after using 7-10 rolls of supplies
♦ in extreme temperatures, humid conditions, or a dirty environment
♦ when you see voids in the print
♦ after a supply jam.
Cautions:
The following actions may damage the printhead and void your warranty.
♦ Do not use silicone to clean or lubricate.
♦ Do not use sharp objects to remove adhesive or label particles from
the printhead area.
♦ Do not touch the printhead with your fingers.
To clean the printhead:
1. Turn off the printer.
2. Open the supply cover and remove the supplies. See “Removing
Supplies” in Chapter 3 for more information.
3. Check the supply holder for adhesive buildup and clean it if
necessary.
4. Ground yourself by
touching a metal object
other than the printer.
Grounding prevents
electrostatic discharge,
which may damage your
printer.
5. Clean the printhead area of
all adhesive and label
particles using a Monarch
Cleaning Pen (#114226) or
a soft cloth moistened with
isopropyl alcohol.
6. Reload the supply roll and
close the supply cover.
Printhead