Filter
Top Products
4-8 Operator’s Handbook
Select: Description
Adjust Contrast
Scroll to change contrast. The higher the number, the
darker the print; the lower the number, the lighter the
print.
The print contrast controls the darkness of the printing
on your supply. The range is –28 to +40 and the default
is 0. You may need to increase or decrease the print
contrast depending on your supply type. Having the
correct print contrast setting is important because it
affects how well your barcodes scan and how long your
printhead lasts.
Serial Quality
A label prints with barcodes to
scan to check the quality of serial
bar codes.
Parallel Quality
A label prints with barcodes to
scan to check the quality of
parallel bar codes
3. Tap Back or X in the upper-right hand corner of the screen to return
to previous screen.
Power Management
The printer will shut off after a predetermined amount of idle time.
The printer will “wake up” when you start using it again. Turn off the
backlight to conserve power when leaving the printer on and idle.
From the Control Panel, tap Power, Display, Backlight.
Radio Frequency Communications
Your printer may be able to communicate with other printers, an access
point, or network via radio frequency (RF) communications. Your System
Administrator can tell you if you have this feature and any special
procedures you need to perform.