C2681M (2/08) 11
PRODUCT SERIAL NUMBER LABEL PLACEMENT
Product serial number labels help Pelco Product Support identify your system and its factory configuration in case the EW5001 or its components
require service.
A label citing your product’s serial number is attached to the rear panel of the EW5001. Because the label will be covered by the J-box (supplied),
two additional labels are provided. These additional labels also list the media access control (MAC) or network adapter address for the unit.
Attach one of them to your product documentation or other location. The second label is a spare.
To use these labels:
1. On the rear panel of your EW5001, locate two small labels, attached with a yellow sticker that reads, “Extra serial number labels: remove
prior to installation.”
2. Remove the yellow sticker and the labels.
3. Peel away the backing from one label and attach it to this installation manual, other product documentation, or other location.
Figure 5. Product Serial Number Label
MODEL
FREQ
50/60HZ
Sample Text
AMPS
VOLTS
Sample Text
REV
Sample Text
MFG BY PELCO, CLOVIS, CA
Model
SN
MADE IN USA
PRODUCT LABEL