Pelco EW5001 Network Card User Manual


 
24 C2681M (2/08)
DISCONNECTING AN ANTENNA CABLE
The antenna cable connector is locking. To disconnect it, first pull the sleeve away from the device and hold it (refer to Figure 18). Then pull the
connector from the device.
Figure 18. Disconnecting an Antenna Cable Connector
OPENING THE J-BOX
The latch that secures the EW5001 includes a safety release.
To open the J-box, refer to Figure 19 and perform the following steps:
1. Press and hold the safety release.
2. Release the latch.
3. Open the J-box.
Figure 19. J-Box Safety Latch Release
SLEEVE
SAFETY LATCH
RELEASE