Pelco EW5001 Network Card User Manual


 
C2681M (2/08) 29
Specifications
MODEL NUMBER
EW5001-2 Wireless access point or bridge; 2.4 GHz
EW5001-5 Wireless access point or bridge; 5.8 GHz
SUPPLIED ACCESSORIES
Power Cable with Connector 1
Weatherproof Network Connector 1
SYSTEM
Operating System Linux
®
User Interface Remote operation from Endura workstation or VCD5000
INDICATORS
MODE Green, amber, red
1 through 5 Green
RADIO FREQUENCY
Wireless Radio Standards 802.11a/802.11g
Modulation OFDM
Transmitting Frequency
2.4 GHz* 2.412 to 2.462 GHz (ISM)
5.8 GHz 5.745 to5.825 GHz (ISM)
Power Output
2.4 GHz 24 to 28 dBm (±1 dB)
5.8 GHz 21 to 26 dBm (±1.5 dB)
Receiver Sensitivity
2.4 GHz -91 to -74 dBm (±1 dB)
5.8 GHz -91 to -74 dBm (±1.5 dB)
Channels
2.4 GHz* 11, overlapping
5.8 GHz 5, nonoverlapping
Antenna Types and Gain
Planar antenna 2.4 GHz, 8.5 dBi gain, 75° x 60° beamwidth
5.8 GHz, 13.5 dBi gain, 40° x 35° beamwidth
5.8 GHz, 23.0 dBi gain, 9° x 9° beamwidth
5.8 GHz, 28.0 dBi gain, 4.5° x 4.5° beamwidth
Grid parabolic dish antenna 2.4 GHz, 14.0 dBi gain, 21° x 14° beamwidth
Dual band sector antenna 2.4 GHz, 12.0 dBi gain, 120° x 15° beamwidth
5.8 GHz, 14.0 dBi gain, 120° x 8° beamwidth
Polarization Vertical, horizontal
Data Throughput Rate 12 Mbps to 54 Mbps
*Due to USA and Canada regulatory compliance, 2.4 GHz models are restricted. Power output is limited to 16.75 dBm; channels 1, 10, and 11 are
unavailable.
NETWORK
Interface 1, RJ-45, 10/100/1000Base-T
Security 2 modes: secure mode (device authentication) and unsecure mode