Filter
Top Products
7-10
7.1.18. Removing the Inverter PCB, TS PCB
and LCD Unit
1. Remove the 2 Screws. <N6>
2. Disconnect the 3 Cables from the 3 Connectors.
3. Remove the Inverter.
4. Disconnect the 2 Cables from the 2 Connectors.
(CN200,CN201)
5. Remove the TS PCB.
6. Remove the 2 Drop Holders.
7. Remove the LCD Unit.
Screws <N6>: DRQT26+E4FKL
7.1.19. Removing the Antenna PCB L and R
1. Remove the 4 Screws <N2>.
2. Remove the W-LAN ANT Cover L and R.
3. Remove the 2 Screws. <N2>
4. Remove the Antenna PCB L and R.
Screws <N2>: DRHM5054XA
<N6>
<N6>
LCDUnit
LCDFrontCabinet
InverterPCB
TSPCB
LCDDropHolder
LCDDrop
Holder
A
B
A
B
C
C
toConnector
(CN200)
Connector
(CN200)
Connector
(CN201)
<N2>
<N2>
<N2>
<N2>
LCDRearCabinetAss'y
AntennaPCBR
AntennaPCBL
W-LANANTCoverR
W-LANANTCoverL
<N2>
<N2>