Filter
Top Products
7-25
7.2.12. Setting the FPC HDD BAT
1. Fix the FPC HDD BAT using the Screw. <N16>
2. Connect the 2 Cables to the 2 Connectors. (CN7,CN8)
3. Connect the Cable to the Connector. (CN800)
4. Attach the PAD Protect Sheet.
5. Connect the Cable to the Connector. (CN9)
6. Attach the Tape.
7. Connect the 2 Cables to the 2 Connectors. (CN10,CN26)
8. Attach the Tape.
9. Attach the Antenna Cable Sheet on the Main PCB.
10. Fix the HDD FPC BAT using the 4 Screws. <N29> No1 to
No4
Note:
Tighten the Screws in the numbered order (No1 to No4).
Screw <N16>: DRQT26+E5FKL
Screw <N29>: DRQT26+E3FNL
■ Preparation of HDD FPC ASSY
<N29>
<N16>
<N29>
Connector(CN10)
Connector(CN26)
HDDCableCover
FPCHDDBAT
AntennaCableSheet
toConnector(CN800)
Connector(CN800)
toConnector(CN26)
Tape
Connector(CN9)
PadPCB
Tape
toConnector(CN8)
toConnector(CN7)
Connector
(CN8)
PadProtect
Sheet
Connector
(CN7)
No.3
<N29>
No.2
<N29>
No.1
No.4
Nottoforgetfolding
Tightenof
Screw
Tightenof
Screw
BatteryConnectorPIN
Cushionisset
BatteryConnector
PINisset
BatteryGuide
isset
Orderoffixing
Screw Screw
Foldmountainbased
onthewhiteline.
Nottoforgetfolding