Philips Network Adaper Network Card User Manual


 
32
33
ON-SCREEN MENU CONTROLS
TYPICAL TV FEATURES
D
epending on the model of your television and its
features, some or all of the display functions and
features described below will be valid. Remember, the TV
must be in the Consumer mode to bring up the “SETUP
MENU.” This can be selected by pressing the A button
on the optional T374AH remote, then selecting
Consumer mode from the Net1Card “COMMERCIAL
SETTINGS”menu. Commercial mode is the default selec-
tion. (See page 18 for details.)
DESCRIPTION OF FEATURES
Color Adjustments - Press the (+) or
(-) button to adjust the brightness to
the desired level.
Press the (+) or (-) button to adjust the
picture to the desired level.
Press the (+) or (-) button to adjust the
color to the desired level. Press the (+)
or (-) to adjust the tint to the desired
level.
Press the (+) or (-) button to adjust the
sharpness to the desired level.
V
olume controls - Press the (+) or (-)
button to set the maximum allowable
volume available from the keyboard or
the Guest transmitter.
Press the (+) button to disable the nor-
mal functioning of the volume control.
This forces the volume to the maxi-
mum level allowed by the volume lim-
iter described in the next step. In this mode the mute func-
tion is disabled. Press the (-) button for “standard volume
up/down,” allowing normal volume control operation.
Press the VOLUME UP or VOLUME DOWN button to set
maximum level available. The range is made up of 63 steps
from minimum to maximum.
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
CABLE
PROGRAM
CH ADD/DEL
LABELS
REMINDER
ON CHANNEL
POWER ON
DISPLAYS
KEYBOARD
SMART SND
INPUT
ESP MODE
CHAN GUIDE
LANGUAGE
A/V MUTE
CHAN BLANK
VOL FORCE
MIN VOLUME
MAX VOLUME
ON VOLUME
SPEAKER
BASS BOOST
VOLUME BAR
EXIT
SETUP MENU
ON-SCREEN MENU CONTROLS
I
n the Consumer mode, you can make adjust-
ments to the TV picture using the TV's “SETUP
MENU.” Follow the steps below for the proper
procedure.
Press the SELECT (M) button on the remote
control to see the on-screen menu.
Press the MENU ▼▲ on the remote control
repeatedly to move the highlight to the desired fea-
ture to change or adjust.
Press the MENU ᮤ ᮣ buttons on the remote
control to adjust or change the highlighted feature.
Press the RECALL button on the remote con-
trol to clear the screen when finished.
BEGIN
PICTURE ADJUSTMENTS
A
ccess to Net1Card’s internal “COMMERCIAL
SETTINGS,” “RECEIVER CONTROL,” “TRANS-
MITTER CONTROL,”and “FACTORY TEST MENU”
can only be gained with the optional T374AH remote.
Net1Card
has two different operation modes: Consumer
and Commercial. In the Consumer mode, the TV's
“SETUP MENU” can be accessed by pressing the
Menu button on either a standard remote control or on
the TV'’s front keypad (if the keypad is enabled). In the
Commercial mode, the “SETUP MENU” can only be
accessed using a Setup remote control (T374AH).
Net 1Card IB 2/15/00 12:18 PM Page 32