Filter
Top Products
5
FEATURES
• Audio/Video Jacks for direct connections with VCRs
(or other video accessories) for quality TV picture
and sound playback.
• Audio/Video Inputs.
• Audio/S-Video Inputs.
• Ability to broadcast to an individual TV, to a group
of TVs, or to all the TVs in the series.
• Ability to poll individual TVs.
• Clone port for limited applications.
4
The Net1Card is a network television systems control
SmartCard that is designed to work with Philips
SmartCard televisions in a balanced RF distribution sys-
tem. The Net1Card allows an individual with a unit set in
the Transmitting mode to control all televisions, up to 8
zones of televisions, or a single television, all set in the
Receive mode. The controls include turning the sets on,
setting the volume, and tuning to a specific channel for
live or prerecorded messages or programs. Any Net1Card
can be set up to transmit or receive.
The Net1Card allows the individual with the Transmitter
unit the option to lock out the Receiver units so that the
power, volume, or channels cannot be changed until they
are restored by the Transmitter unit. All of this is done in
a matter of seconds by using an optional T374AH IR
remote control device. (See page 5.) Other features
include the ability to change channels for different mes-
sages, turn off all receiver televisions from a single loca-
tion, send different messages or programs to different
groups or individual sets. The Net1Card is easy to install,
set up, and operate. The Net1Card also has the ability to
poll an individual television to ensure correct systems
operation.
The Net1Card also has composite video input, an S-
Video input, two audio inputs, an RF input, a speaker
jack and a cloning port for easy connectivity to a variety
of media devices.
INTRODUCTION
REMOTE OPERATION
-
RECALL
VOL
CH
1
2
3
4
5
6
7
8
9
0
TV
TV
DCM
CH GDE
ENTER
S
E
L
E
C
T
M
SLEEP
A/CH
MUTE
P.PREF
POWER
+
SETUPSETUPGUEST
E F G
A
C
D
B
CC
SLEEP - In the Consumer mode, press
this button to select the amount of time
you want before the TV turns off.
RECALL - Press this button to
bring up the closed caption
mode or to exit Net1Card
menus.
SELECT (M) - In
the Consumer
mode, press this
button to bring up
the on-screen menu
options. Also may
be used to advance
the cursor.
CH(annel) - Press
this button to scroll
through all available
channels.
A/CH - Press this
button to toggle
between the present
and last viewed
channels.
NUMBERED
BUTTONS - Press
these buttons to
directly access any
available channel.
(If a single digit
channel is chosen,
press 0 first.
Example for chan-
nel 6; first press 0,
then 6.) In certain
Net1Card menus,
use these buttons to
make selections.
VOL(ume) - Press
this button to adjust
the sound level of
the TV.
ENTER/RESET -
In the Consumer
mode, press this
button to reset TV
settings to factory.
CC - Press this
button to bring the
Closed Captioning
option to the
screen.
POWER -
Press this
button to
turn the TV
ON or OFF.
TV/GUEST - Press this button before
trying to setup the TV after installing
the Net1Card. If the menus do not
come up when you press the A or D
button, press this button and try again.
D & F - Press the
the D button to select
features under each
specific Net1Card
mode. Press the F
button to display the
version of Net 1Card
installed.
L
isted below is a brief description of the TH374AH
remote control. You need one remote control
(sold separately) to setup and operate the Net 1Card.
Only buttons important to Net1Card are described.
CURSOR KEYS -
Press these buttons
(
▲ ▼ ᮣ ᮤ ) to
scroll or move
through the on-
screen menu or to
adjust the picture in
certain features.
MUTE - Press this
button to turn the
sound OFF on the
TV. Press again to
return the sound to
its previous level.
A - Press the A but-
ton to set a TV in
the Net1Card
Transmit, Receive,
or Factory mode.
Net 1Card IB 2/15/00 12:17 PM Page 4