Philips Network Adaper Network Card User Manual


 
11
10
VIDEOVIDEO
AUDIOAUDIO
RF INRF IN
S-VIDEOS-VIDEOS-AUDIOS-AUDIO
CLONECLONE
PORTPORT
VIDEOVIDEO
AUDIOAUDIO
RF INRF IN
S-VIDEOS-VIDEO S-AUDIOS-AUDIO
CLONECLONE
PORTPORT
1
2
300 to 75
Adapter
(483521827003)
Combination VHF/UHF
Antenna
(Outdoor or Indoor)
Twin Lead
Wire
Round Cable
75
Back of TV
Net1Card
Jack Panel
VIDEOVIDEO
AUDIOAUDIO
RF INRF IN
S-VIDEOS-VIDEOS-AUDIOS-AUDIO
CLONECLONE
PORTPORT
E
N
H
A
N
C
E
D
F
O
C
U
S
ScanCard II
VIDEOVIDEO
AUDIOAUDIO
RF INRF IN
S-VIDEOS-VIDEO S-AUDIOS-AUDIO
CLONECLONE
PORTPORT
VHFV
VHF
UHF
300
75-300 ADAPTER
OR
Round Cable 75
75-300 Ohm Adapter
UHF/VHF Combiner
Net1Card
Jack Panel
Back of TV
Outdoor UHF Antenna
(Twin Lead 300 Ohm)
Outdoor VHF
Antenna
(Twin Lead
300 Ohm)
Outdoor VHF
Antenna
(Round 75
Cable)
Twin Lead
Wire
Round End
OPTIONAL HOOKUPS
A
combination antenna receives normal
broadcast channels (VHF 2-13 and UHF
14-69). Your connection is easy since there is
only one 75(ohm) antenna plug on the
back of your TV - and that’s where the
antenna goes. (If you have more than one
antenna, please refer to the diagram at the
bottom of page 11 for additional hookups.)
If your antenna has a round cable (75 ohm)
on the end, then you're ready to connect it to the
TV.
If your antenna has flat twin-lead wire (300
ohm), you first need to attach the antenna wires to
the screws on a 300 to 75 ohm adapter.
Push the round end of the adapter (or anten-
na) onto the RF IN plug on the rear of the TV. If
the round end of the antenna wire is threaded,
screw it down tight.
BEGIN
Remember, be sure to set the TV for the
type signal you’ve connected.
To set the TV to select only the channel numbers
in your area see how to “Program” or “Add”
channels in memory.
To order any optional accessory contact your deal-
er or call the toll-free accessory ordering number
(1-800-292-6066):
UHF/VHF Combiner: (SBV1133AO1)
75-300 Ohm Adapter: (SBV1113AO1)
300-75 Ohm Adapter: (483521827003)
SMART HELP
ANTENNA HOOKUPS
Net 1Card IB 2/15/00 12:17 PM Page 10