Filter
Top Products
Usin
g
your Pro
g
rammable Power Supply 5 - 3
5.3 REMOTE OPERATION
In the remote mode, pressin
g
the front panel keys will have no effect on
pro
g
rammed settin
g
s. It is, however, possible to view the actual settin
g
s on the
front panel display, by pressin
g
the front panel keys SELECT, V, I, OVP, DELAY,
UNMASK, DISP, LCL, and AUX.
SCPI (Standard Commands for Pro
g
rammable Instruments) is a standardized set
of commands to be used for remote control of pro
g
rammable test and measure
instruments. It defines the syntax and semantics that the controller must use to
communicate with an instrument, and is implemented in the instrument’s
firmware.
Please, read the users handbook ‘Standard Commands for Pro
g
rammable
Instruments? to
g
et familiar with the SCPI and IEEE-488.2 standards. This
handbook can be ordered at your local Fluke representative. See Appendix A for
more information.