Filter
Top Products
Managing LiveGateway from the LiveManager
Gatekeeper
Overview
This chapter describes how to view and manage LiveGateways remotely by using the LiveGateway SNMP
Manager feature from within the LiveManager application. To use this feature, SNMP service for each
LiveGateway must be enabled. Normally, SNMP service for a LiveGateway is enabled from the LiveGateway
Configuration window when that LiveGateway is installed on your system.
When SNMP service is enabled, you can:
• Monitor the status of LiveGateway and determine its current activities.
• Configure the ISDN BRI when you need to change WAN switch information.
• Locate and resolve LiveGateway problems.
Note
This section assumes you have access to the LiveManager gatekeeper. For more information on
LiveManager, refer to the PictureTel LiveManager Product Guide.
The information in this section is organized into the following categories:
• SNMP Service
• Using the LiveGateway SNMP Manager
• Saving the Window Layout & Position
• Configuring the LiveGateway SNMP Manager
• Adding LiveGateway Servers
• Changing Server Information
• Deleting Servers
• Opening a LiveGateway Server
• The LiveGateway Server Window
• Working with the LiveGateway Server Window
• Monitoring LiveGateway Status
• Configuring the ISDN BRI
• Setting On Line Status
• Setting Off Line Status
• Performing a Self Test
• Testing and Resetting the Board
• Performing a Loop Back Test
• Viewing a POST Result
• Viewing LiveGateway Board Statistics
• Viewing Board Settings & Version Information