Filter
Top Products
Pitney Bowes DA300 Operator Guide 2-13
Setting Up the DA300 Printer • 2
8. Install the Ink Jet Cartridge
The printer uses an Ink Jet Cartridge for printing. You
must install the cartridge before you can print. To begin:
1. With the printer on, press the On Line key until the
display reads OFF LINE.
2. Open the back cover of the printer.
3. Press the + key on the control panel to move the
carriage to the middle of the printer.
4. Remove the cartridge from its shipping container by
peeling the top cover off. Be careful not to touch the
copper ribbon.
Installing and
Removing the
Ink Jet
Cartridge
WARNING! The ink in the cartridge may be
harmful if swallowed. Keep new and used
cartridges out of reach of children. Discard
empty cartridges immediately.
5. Gently remove the tape covering the ink nozzles on
the print cartridge, being careful not to touch the
copper nozzles.
6. Gently insert the cartridge into the carriage at ap-
proximately a 45 degree angle with the green arrow
on the cartridge top pointing toward the inside of
the printer.