Filter
Top Products
3-14 DA300 Printer Operator Guide
3 • DA300 Basics
Adjust the exit rollers so they overlap the left and right
edges of the material by 1/4". Slide the rollers from side
to side to make the adjustment.
8. Adjust the Exit Rollers
Setting Up A
Job
(continued)
IMPORTANT: Make sure the rollers do not touch any
printed area of the material. If this happens, the rollers will
act like a printing press and imprint a faint impression at
incremental distances on the material. If this happens,
move the roller or rollers toward the nearest clear zone,
that is, an area free of printing.
Output Stack Height
The output stacker holds up to five inches of material
before it becomes necessary to remove the stack from
the bin. The optional W760 stacker increases capacity to
300 #10 envelopes.
NOTE: As the stack approaches the 5" limit, there is a
potential for stacking misfeed (pieces not neatly stacked
one on top of the other). This can cause envelopes to
stack out of ZIP Code sequence.
Exit Rollers