Filter
Top Products
Appendix A • Control Panel Menus
DA300 Printer Operator Guide A-21
Use this option to set the number of lines in the ad-
dress field.
1. Press the + or – buttons to scroll through the
Setup Menu options until 4. LINES PER ADDRESS
appears on the LCD panel.
2. Press the Enter button to select this option.
3. The LCD displays “LINES/ADDRESS + (MORE) or –
(LESS)”.
The range can be from 1 to 66 lines. The range can
be adjusted by pressing the + button (MORE) or –
button (LESS). The printer can print an address
which is typically between 3 and 8 lines.
4. Press the Menu button to back out of the menu
until the printer displays OFF LINE. Then, press the
On Line Button to enable the printer.
4. Lines Per
Address
5. Communications
Transmitting data from the computer to the DA300 is
by way of the parallel interface or the serial interface.
The printer automatically senses the interface through
which data is being sent. When the computer uses the
printer’s parallel interface, no communication settings
are required.
When the serial interface is used, the DA300 Commu-
nications menu settings must be configured to match
the computer settings. Configure the computer to use
either the XON/XOFF or DTR handshaking settings to
communicate with the DA300.
The DA300 serial communications menu settings
include:
A. Baud Rate
Baud Rate choices are (1200), (2400), (4800), (9600)
and (19200).