Pitney Bowes DM575 Postal Equipment User Manual


 
1 • Read This First
1 - 4 SV62201 Rev. C
When removing jammed material, avoid using too much force to pre-
vent personal injury and damaging equipment.
To prevent overheating do not cover system vent openings.
When lifting covers, wait for all parts to stop moving before placing
hands near feeder path or printer.
Do not remove covers as they enclose hazardous parts that should only
be accessed by a Pitney Bowes Service Representative.
Use only Pitney Bowes approved supplies, e.g., inks, tapes, and clean-
ers. Call the Pitney Bowes Supply Line™ listed in the Pitney Bowes
Contact Information List at the front of this guide.
Always follow the specific occupational safety and health s prescribed
for your workplace
If you use an AC adapter to power the meter when it is off the mailing
machine base:
Use only the AC adapter designed specifically for the IntelliLink® Con-
trol Center. Third-party AC adapters may damage the IntelliLink® Con-
trol Center.
To protect against electrical shock, plug the AC adapter into a properly
grounded power outlet.
Do not route the AC adapter cable over sharp edges or trap between
furniture.
NOTE: Your mailing system requires annual cleaning by a Pitney Bowes
service representative. For continued safe operation, contact your local Pit
-
ney Bowes office for a scheduled cleaning
CAUTION: In case of an ink spill, leaking ink or exces-
sive ink accumulation, immediately power down and dis-
connect the power cord from the wall plug and call your
local Pitney Bowes office for a cleaning.