Pitney Bowes DM575 Postal Equipment User Manual


 
DM525™ and DM575™ Series Digital Mailing System Operating Guide
SV62201 Rev. C 4-11
Mode Selection:
Key in Postage
Use this mode if you know what the correct amount of postage is for your
mail and you intend to apply this postage to each piece.
1. Press the Mode key.
2. Select Key In Postage.
3. Key in the correct postage value using the numeric keys on the
IntelliLink® Control Center, then press the Enter key.
4. If you are done, place the mail on the feed deck and press the Start
key, otherwise go to step 4.
5. If you want to change the date, add or change an advertisement or
inscription, press the Menu key and select Meter Stamp Options. For
more information, refer to
“Selecting the Meter Stamp Options” in this
chapter.
6. When finished, place the stack of mail or piece of mail on the feed deck
and press the Start key.
Mode Selection:
WOW® - Weigh-
On-The-Way®
This feature is available only on systems that have the optional
Weigh-On-The-Way® (WOW®) module installed.
WOW® feature increases your productivity by weighing the piece of mail
and applying the correct postage as it travels through the mailing machine.
To run mail in the WOW® mode:
1. Press the Mode key.
2. Select WOW - Weigh on the Way.
3. Press the Class key and select the class. For more information, refer to
“Selecting the Class, Carrier, Special Services or Options” in this chap-
ter.
4. Press the Seal key and select your sealing option.
5. Place the stack of mail on the feed deck.
6. Press the Start key.
WARNING! Do not lean on or disturb the system while it is process-
ing mail in this mode. It will affect the amount of postage applied to
the mail piece.