Pitney Bowes DM575 Postal Equipment User Manual


 
2 • Meet the DM525™ and DM575™ Digital Series Mailing System
2 - 12 SV62201 Rev. C
Connectors on the Back of the IntelliLink® Control Center
Analog Phone Line Connector - The term analog phone line refers to
a RJ11C or RJ11W compatible (single line) telephone wall plug typically
used for a residential phone or facsimile hookup. If you do not have a
LAN connection, you can use the analog phone line connector to add
postage funds to your meter. If the analog phone line is not close to
your DM Series™ system, you can remove the IntelliLink® Control
Center from your system and move it to another location. For more
information, refer to Connecting Your Control Center to a Remote Ana
-
log Line in Chapter 6 of this guide.
External USB Connector - The USB connector on the back of the
IntelliLink® Control Center is used for connecting to the flash memory
drive required to run INVIEW™ Accounting. Refer to Chapter 7,
INVIEW™ Accounting in this guide for more information.
IntelliLink® Control Center AC Adapter Receptacle - The receptacle
for the AC adapter is located on the back of the IntelliLink® Control
Center. If you need to remove the control center from the mailing sys
-
tem base and move it to an analog telephone line, you plug the AC
adapter into this receptacle.
Analog Phone Line Connector
AC Adapter Receptacle
USB Connector