Pitney Bowes DM575 Postal Equipment User Manual


 
4 • Running Mail
4-14 SV62201 Rev. C
Mode Selection:
Attached Scale
Use this option If the AutoScale feature is set to Off see Set Up Scales/
Rates: AutoScale in Chapter 5 in this guide.
1. Press the Mode key.
2. Select Attached Scale. The “Attached Scale Mode” screen appears.
3. Place the piece of mail on the scale.
4. If the class displayed in this screen is incorrect, press the Class key
and select the class. For more information, refer to
“Selecting the
Class, Carrier, Special Services or Options” in this chapter.
5. If this is a package, press the Tape key, otherwise go to step 6.
6. Place the piece of mail on the feed deck.
7. Press the Start key.
Mode Selection:
Seal Only
Seal Only Mode allows you to seal envelopes without applying postage. If
you are running INVIEW™ Accounting, and you select Seal Only Mode,
you will be prompted to select an account to track the pieces against.
When you view or print an accounting report, “Seal Only” will appear in the
Class column if the pieces were processed in Seal Only mode.
1. Press the Mode key.
2. Select Seal Menu - No Printing and select the appropriate option.
3. Select the Reset Counter option if you want to clear the number of
pieces of mail fed into the machine in the seal only mode.
4. Place the mail on the feed deck.
5. Press the Start key.
CAUTION: Make sure you center the mail on the scale and
check to be sure it is not touching any other surface or object.
NOTE: For additional sealing options, press the Seal key on the IntelliLink®
Control Center. This allows you to select the following options:
Sealer on (seal envelopes)
•Sealer off
Seal only, don’t print