Planar PD7010 Projector User Manual


 
23
iteM deScriptiOn default
Auto source
selection
 OFF
Source select

following screen appears.

Press the cursor button to select an input source:
RGB: select RGB input to display images from a computer.
DVI: select Digital Video Input for digital display quality.
HDMI:
digital, point-to-point interface for video signals designed as a
single-cable solution for home theater and consumer electronics
equipment.
Component: select component video as the input source.
Component video maintains the three YUV video signals in three
separate channels and provides a sharper image than compos-
ite video and S-Video.
Video: select composite video as the input source. Composite
video combines all three YUV video signals into one channel.
NTSC, PAL and SECAM television are examples of composite
video sources. S-Video and component video provide a sharper
image than composite video.
S-Video: select Super Video as the input source. S-Video com-
bines the three YUV video signals into two channels. S-Video
provides a sharper image than composite video, but is not as
good as component video.
SCART: SCART connectors are prevalent in Europe. SCARTs
are used to hook up VCRs and DVD players to TV sets.
Hot Key Settings: Press the cursor button to set hot keys.
Source enable
Press Enter
to enable selection of the source (Auto source selec-
tion must be enabled).
Full