Filter
Top Products
36
LED Error Messages
Before cooling, the LED will blink three (3) times in two (2) second intervals. The LED message is
0.3 seconds. The LED messages are listed below:
errOr cOde MeSSaGe led flaSh
Environment Over Temperature 1 long blink / 1 short blink
DMD Over Temperature 1 long blink / 2 short blinks
Lamp Over Temperature 1 long blink / 3 short blinks
Fan1 Locked
1 long blink / 4 short blinks
Fan2 Locked
2 long blinks / 2 short blinks
Fan3 Locked
2 long blinks / 3 short blinks
Fan4 Locked 2 long blinks / 4 short blinks
DMD Initial Fail 3 long blinks / 1 short blink
Lamp Initial Fail 3 long blinks / 2 short blinks
Ballast UART Error 3 long blinks / 3 short blinks
Temperature Sensor Fail 3 long blinks / 4 short blinks
Inter Lock Open 4 long blinks / 1 short blink