Filter
Top Products
4
General Safety Information
Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts
Follow all warnings and cautions in this manual and on the unit case.
The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into
the lens when the lamp is on.
Do not place the unit on an unstable surface, cart, or stand.
Avoid using the system near water, in direct sunlight, or near a heating device.
Do not place heavy objects such as books or bags on the unit.
Power Safety
Only use the supplied power cord.
Do not place anything on the power cord. Place the power cord where it will not be in the way
Remove the batteries from the remote control when storing or not in use for a prolonged pe-
riod.
Replacing the Lamp
Replacing the lamp can be hazardous if done incorrectly. Refer to “Replacing the Projection Lamp” on
page 31 for clear and safe instructions for this procedure. Before replacing the lamp:
Unplug the power cord.
Allow the lamp to cool for about one hour.
Important Recycle Instructions:
Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be
hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws.
For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG
WWW.LAMPRECYCLE.ORG
Disposal of old Electrical & Electronic Equipment (Applicable throughout the European Union and otherthe European Union and other European Union and otherEuropean Union and other
European countries with separate collection programs) programs)programs)
This symbol found on your product or on its packaging, indicates that this product should not be this product should not bethis product should not be
treated as household waste when you wish to dispose of it. Instead, it should be handed over to dispose of it. Instead, it should be handed over todispose of it. Instead, it should be handed over to
an applicable collection point for the recycling of electrical and electronic equipment. By ensuring point for the recycling of electrical and electronic equipment. By ensuringpoint for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative consequences to the negative consequences to thenegative consequences to the
environment and human health, which could otherwise be caused by inappropriate disposal of this could otherwise be caused by inappropriate disposal of thiscould otherwise be caused by inappropriate disposal of this
product. The recycling of materials will help to conserve natural resources. This symbol is only valid recycling of materials will help to conserve natural resources. This symbol is only validrecycling of materials will help to conserve natural resources. This symbol is only valid This symbol is only validThis symbol is only valid
in the European Union. If you wish to discard this product, please contact your local authorities or If you wish to discard this product, please contact your local authorities orIf you wish to discard this product, please contact your local authorities or your local authorities oryour local authorities or
dealer and ask for the correct method of disposal. method of disposal.method of disposal.
Cleaning the Projector
Unplug the power cord before cleaning. Refer to “Cleaning the Projector” on page 33.
Allow the lamp to cool for about one hour.
•
•
•
•
•
•
•
•
•
•
•
•
•
Hg