Planet Technology FGSW-2402PVS Switch User Manual


 
11
Figure 3-5 Port Status Screen
O Object
Description
Port
Indicate port 1 to port 24, and
2-module slot.
Enable
Display
disable or enable on each port.
Link
Display current link status on each port.
Spd/Dpx
Display current speed duplex
mode on each port.
Flow Ctrl
Display current flow control status on each port.
Table 3-2 Descriptions of the Port Status screen Objects
"%
Press 2 on your keyboard or use the "TAB" key to move the highlight to the Port Configuration and press
“Enter” to access the screen of Port Configuration from the Main Menu screen (please see the figure3-4).
The screen of Port Configuration in figure 3-6 appears. Table 3-3 describes the Port Configuration objects.
This menu allows you to change the port configuration of the Switch. The user can disable/enable each port and
determine each port’s auto-negotiation, mode, speed, duplex mode, flow control. Use the “TAB” key to choose
the <Edit> then press “Enter”. Then start to modify these settings. Use the “TAB” key to move the highlight to
the object and press the “Space Bar” key to toggle back and forth between the options. After setup completed,
press “ESC” key to return to Actions menu and use the “TAB” key to choose the <Save> for saving the current
configuration.
Figure 3-6 Port Configuration Screen
O Object
Description
Port
Indicate port 1 to port 24, and 2-module slot.
Enable
Allow user to disable or enable each port.
Auto
Allow user to disable or enable Auto negotiation feature on each port.
Spd/Dpx
Allow user to change the speed duplex mode on each port.
Flow Ctrl
Allow user to disable or enable flow control on each port.
Table 3-3 Descriptions of the Port Configuration Screen Objects
Due to the hardware restriction, port #25/ port # 26 of the Switch does not allow to configure the speed and
duplex mode. The operation of the two ports will base on the table below.
Module-slot / Port #25, #26 Module / Port Type Speed / Duplex
MII-TP 100Base-TX; RJ-45 Auto-negotiation
MII-GT / FGSW-2620PVS 10/100/100Base-T; RJ-45 Auto-negotiation
MII-SC / MII-Sxx
*1
100Base-FX; SC Force 100 Full-duplex mode
MII-ST 100Base-FX; ST Force 100 Full-duplex mode
MII-SA20/SB20
100Base-FX;
Single SC
Force 100 Full-duplex mode
MII-SX 1000Base-SX; SC Force 1000 Full-duplex mode
MII-LX; MII-Lxx
*1
1000Base-LX; SC Force 1000 Full-duplex mode
Table 3-4 Operation of MII-series module