Filter
Top Products
35
Figure 4-20 Bandwidth Control save successfully Screen
Press “Back” for back to previous web screen.
",%
This function provides the advanced configuration of the Switch. The available options are shown as below:
Advanced Switch Configuration:
Allow user to configure the advanced Switch configuration. Please refer to section 4.10.1.
Password Setting:
Allow user to disable or enable password protection. Set the username and password, Maximum up to 8
characters. Please refer to section 4.10.2.
Reset System Default Setting:
Allow user to reset the Switch to default mode. Please refer to section 4.10.3.
Reboot System:
Allow user to reboot the Switch. Please refer to section 4.10.4.
System Information:
Display the firmware and web page version. Please refer to section 4.10.5.
IP Configuration:
Allow user to set the IP address, subnet mask and Default gateway. Please refer to section 4.10.6.
Return to Main Menu:
Allow return to the Console Main Menu. Please refer to section 4.10.7.
The screen in figure 4-21 appears.
Figure 4-21 Misc Configuration Screen
",& ( #%
The available options are shown as below:
Broadcast Strom Filter:
If this function enable, the Switch will limitation the broadcast packets. The available options are off, 5%, 10%,
and 20%. The screen in figure 4-22 appears.