Filter
Top Products
29
Port Configuration:
Allow user to disable/enable each port, Auto-negotiation disable/enable on each port, per port 10/100Mbps full
and half duplex mode selection. Flow control disable/enable on each port. Explained on section 4.4
Trunk Configuration:
Allow user to enable the trunk function and configure. Explained in section 4.5
VLAN Configuration:
Allow user to enable the port-based VLAN function and configure. Explained in section 4.6
Port Mirroring Configuration:
Allow user to enable the port mirroring function and con figure. Explained in section 4.7
QoS Configuration:
Allow user to enable the QoS function and configure. Explained in section 4.8
Bandwidth Control:
Allow user to enable the bandwidth control function and configure. Explained in section 4.9
Misc Configuration:
Allow user to configure the advanced function. Explained in section 4.10
POE Configuration
Allow user to configure the POE function. Explained in section 4.11
Logout:
Allow user to logout the Switch Web interface. Explained in section 4.12
"#
This menu displays each port’s status of the Switch. The Port Status in the screen will includes each port’s
disable / enable and current link status, connection speed duplex mode and flow control status. The screen is
as like figure 4-3 below.
Figure 4-3 Port Status Screen
You can also click on the refresh button of your browser to get the latest status of the Switch.
""%
This menu allows to setting port disable/ enable, Auto-negotiation disable/ enable, and speed duplex mode
selection, flow control disable/ enable of each port. The screen is as figure 4-4.