Filter
Top Products
21
O
Object Description
Broadcast Strom Filter If this function enable, the Switch will limitation the broadcast packets. The
available options are
Off, 5%, 10%, 20%.
Collision Retry Forever If this function is disabled, when a packet meet a collision, the switch will retry 6
times before discard the packets. Otherwise, the switch will retry until
the packet is
successfully sent.
MAC Table Auto-Aging Allow user to set the aging time of the MAC address table. The available options
are Disable, 150 sec, 300 sec, 600 sec. The default is 300sec.
MAC Table Hashing The available options are CRC Hash and Direct Map.
Console Auto Logout Time
Allow user to set the Auto logout time of console interface. The available options
are Never, 5min, 10min, 20min.
Web Auto Logout Time
Allow user to set the Auto logout time of web interface. The available options are
5min, 10min, and 20min.
Table 3-11 Descriptions of the Advanced Switch Configuration screen Objects
After setup is completed. Press "ESC" key to return to Actions menu and use the "TAB" key to choose the
<Save> for saving the current configuration. The screen in figure 3-34 appears with message “Operation
completed successfully!”
Figure 3-34 Misc Configuration save successfully Screen
3.2.10.2 Password Setting
Press 2 on your keyboard or use the "TAB" key to move the highlight to the Password Setting and press
“Enter” to access the screen of Password Setting from the Misc Configuration screen (please see the
figure 3-32).
Table 3-12 shows the descriptions of the Password Setting screen Objects. Use the "TAB" key to choose the
<Edit>, then start to modify these settings. The screen of Password Setting in figure 3-35 appears.
Figure 3-35 Password Setting Screen