Filter
Top Products
User’s Manual of GSD-800S / GSD-802S / GSD-802PS
be released.
4.2.2 Misc Configuration
The Misc Configuration includes the System name, Location name, Login Timeout, IP Address, Subnet Mask and
Gateway. Through the Web Switch Utility, you can easily recognize the device by using the System Name and the
Location Name. The Login Timeout is to set the idle time-out for security issue, when there is no action in running the Web
Switch Utility and the time is up, you must re-login to Web Switch Utility before you set the Utility. Fill up the IP Address,
Subnet Mask and Gateway for the device. The screen in Figure 4-3 appears.
Figure 4-3 Misc Configuration screen
The page includes the following configurable data:
DHCP Enable
Choose what the switch should do following power-up: transmit a DHCP request,
or manual setting (Disable). The factory default is Disable.
IP Address The IP address of the interface. The factory default value is 192.168.0.100
Subnet Mask The IP subnet mask for the interface. The factory default value is 255.255.255.0
Gateway
The default gateway for the IP interface. The factory default value is
192.168.0.254.
Management VLAN
Specifies the management VLAN ID of the switch. It may be configured to any
value in the range of 1 - 4093. The management VLAN is used for management
of the switch.
System Name
Defines the user-defined device name.
Password
This function provides administrator to secure Web login.