Filter
Top Products
User’s Manual of GSD-800S / GSD-802S / GSD-802PS
4.10.2 Port Access Control
This table is to configure the per port network access control setting. By drawing and select the menu bar to define the port
control type. The screen in Figure 4-44 and Figure 4-45 appears.
Figure 4-44 Per Port network access control configure table
Figure 4-45 802.1X Network access control mode selection
The Network Access Control port configuration table includes the following fields:
• Port
Selects the port to be configured. When the selection is changed, a screen
refresh will occur causing all fields to be updated for the newly selected port.
• Admin State
This selector lists the options for control mode. The control mode is only set if the
link status of the port is link up. The options are:
• Auto: The authenticator PAE sets the controlled port mode to reflect the
outcome of the authentication exchanges between the supplicant,
authenticator, and the authentication server.
• Force authorized: The authenticator PAE unconditionally sets the
controlled port to be authorized.
• Force unauthorized: The authenticator port access entity (PAE)
unconditionally sets the controlled port to unauthorized.
• Port State
This field indicates the configured control mode for the port.
• Re-authenticate
This button begins the re-authentication sequence on the selected port. This
button is only selectable if the control mode is 'auto'. If the button is not selectable,
it will be grayed out. Once this button is pressed, the action is immediate. It is not