Filter
Top Products
IP DSLAM
279
PM Conf PMSF : idleop
Line DELT Conf LDSF : inhibit
Curr Output Pwr(dBm/10) : 10 DS Bin SNR Update :
Enable
Bin Number SNR Margin/bin
---------------------------------
[ 0] 16
Oper Status : Up Admin Status :
Enable
Output Fields:
FIELD Description
IfName
The interface name of the DSL port.
Line Type
Line type used by the DSL port.
Coding Type
Line coding type used by the port.
GsUtopia L2TxAddr
UTOPIA Level 2 Tx address for a line.
GsUtopia L2RxAddr
UTOPIA Level 2 Rx address.
GsUtopia L2RxAddr2nd
Conexant parameter to set UTOPIA Level 2 Rx address for the
secondary bearer channel in case of Dual Latency. (length = 4
bytes)
GsUtopia
L2TxAddr2nd
Conexant parameter to set UTOPIA Level 2 Tx address for the
secondary bearer channel in case of Dual Latency. (length = 4
bytes)
Gs Clock Type
Indicates use of crystal or oscillator.
Gs Action
Allows action on per-line basis.
Trans Atuc Cap
Transmission modes that ATU-C is capable of.
Trans Atuc Actual
Transmission modes
Trans Atuc Config
The transmission modes that the ATU-C is capable of supporting.
The modes available are limited by the design of the equipment.
REFERENCE"Section 7.3.2 ITU G.997.1" (length = 4 bytes).
GsDmtTrellis
Indicates whether trellis coding has been enabled or not.
Trans Atur Cap
The transmission modes that the ATU-R is capable of supporting.
The modes available are limited by the design of the equipment
(length = 4 bytes).
PM Conf PMSF
PM-related parameter used by ATU-C to force a change in the
line state. (Not available for ADSL/ADSL2Plus)
Line DELT Conf LDSF
The DELT-related parameter used by ATU-C to force the line into
the loop diagnostics mode. (Not available for ADSL and
ADSL2plus)