Filter
Top Products
IP DSLAM
79
4.1.3.2 myconfig.cfg Configuration
Step Image Usage
1
Enable TFTP server (tftpd32)
1. Enable TFTP Server
and direct the
myconfig.cfg path for it.
2
$list
Name Ver Time Size
Acc State
-------------------------------------------------------------------------------
/nvram/bin/bootptftp/
TftpBootp.bin 1 Fri Oct 08 09:46:22 2004 111064
RO active
/nvram/bin/control/
CP.bin.gz 1 Fri Oct 08 09:46:22 2004 1293028
RW active
/nvram/bin/dataplane/
DP.bin.gz 1 Fri Oct 08 09:46:22 2004 231572
RW active
/nvram/bin/decompressor/
Decompressor.bin 1 Fri Oct 08 09:46:22 2004 81928
RO active
/nvram/bin/dslphy/
gsv_dsl_AD_DM_3C00000C.bin.gz1 Fri Oct 08 09:46:22 2004 155220
RW active
/nvram/cfg/factorydef/
FD.cfg 1 Fri Oct 08 09:46:22 2004 18973
RW active
2. List the table and verify
that myconfig.cfg had not
created.
3
$download src myconfig.cfg dest /nvram/user/myconfig.cfg ip
192.168.100.188
Downloading the File...
....................................
Block 30 erase in progress
........Flash block 30 erase successful...
FLASH program starts at ADDR 3c0000
###############
FLASH program starts at ADDR 3c0000
Download session Completed,Bytes received 18180...
$
3. Download myconfig.cfg to
NVRAM.
4. 192.168.100.188 is the
PC of TFTP Server..
4
$apply fname /nvram/user/myconfig.cfg
$create atm vc intf ifname aal5-71 lowif atm-23 vpi 8 vci 82
Entry Created
$create eoa intf ifname eoa-71 lowif aal5-71
:
:
$create atm vc intf ifname aal5-145 lowif atm-47 vpi 8 vci 83
Entry Created
$create eoa intf ifname eoa-145 lowif aal5-145
Entry Created
$create bridge port intf ifname eoa-145 portid 146 learning enable status
enable
Entry Created
$
5. Apply to execute the
commands step by step.
5
$commit
6. If this myconfig.cfg will be
running after
7. It will be disappear after
“reboot config default”.