IDL series User Guide
576
5.22.4.3 Reset rmon queue
Description:
Use this command to reset some parameters of queue. This command will reset
the following parameters of queue.
z Set DropCount value to zero.
z Set watermark value to the value of the currently used size of queue .
z Set ThresholdCount value to the zero.
Command Syntax:
Reset rmon queue
Parameters:
None
Example:
$ reset rmon queue
Output Field:
None
5.22.5 RMON Net buffers Info Commands
5.22.5.1 Get rmon netbuf
Description:
Use this command to get the information about all the net buffers present in the
system.
Command Syntax:
get rmon netbuf
Parameters
None
Example:
$ get rmon netbuf