Filter
Top Products
IDL series User Guide
564
bits but including FCS octets).
Total 128-255 Octets
The total number of packets (including bad
packets) received that were between 128 and
255 octets in length inclusive (excluding framing
bits but including FCS octets).
Total 256-511 Octets
The total number of packets (including bad
packets) received that were between 256 and
511 octets in length inclusive (excluding framing
bits but including FCS octets).
Total 512-1023 Octets
The total number of packets (including bad
packets) received that were between 512 and
1023 octets in length inclusive (excluding framing
bits but including FCS octets).
Total 1024-1518 Octets
The total number of packets (including bad
packets) received that were between 1024 and
1518 octets in length inclusive (excluding framing
bits but including FCS octets).
Caution:
z This command is not supported on an EoA interface for which ConfigStatus is
set to Config.
5.22.2 RMON Task Info Commands
5.22.2.1 Get rmon task
Description:
Use this command to get.
Command Syntax:
get rmon task [rname <task-name>]
Parameters:
Name Description
Rname< taskname>
This parameter specifies the name of a particular
task.
Valid values: Any task name present in the
system.