Filter
Top Products
IP DSLAM
443
'asinrule', subrule priority will be same as specified in the rule.
Transport Header
This specifies the type of the transport header in the packet in which the
corresponding IP is being transported. If the value of this field is
'Ethernet', then the IP is being carried in the Ethernet header. If it is
'PPPoE', then the corresponding IP is being carried in the PPP header.
References:
z Generic Filter Commands
5.13.35 Filter subrule UDP Commands
5.13.35.1 Get Filter subrule udp
Description:
Use this command to get.
Command Syntax:
get filter subrule udp [ruleid <ruleid-val>] [subruleid <subruleid-val>]
5.13.35.2 Create filter subrule udp
Description:
Use this command to create.
Command Syntax:
create filter subrule udp ruleid <ruleid-val > subruleid <subruleid-val >
[srcportfrom <srcportfrom-val >] [srcportto <srcportto-val >] [ dstportfrom
<dstportfrom-val > ] [ dstportto <dstportto-val > ] [ srcportcmp eq | neq | lt | leq |
gt | geq | any | inrange | exrange ] [ dstportcmp eq | neq | lt | leq | gt | geq | any
| inrange | exrange ] [ subruleprio low | high | asinrule] [ transporthdr ethernet
| pppoe ]
5.13.35.3 Delete filter subrule udp
Description:
Use this command to delete.
Command Syntax:
delete filter subrule udp ruleid <ruleid-val > subruleid <subruleid-val >