Filter
Top Products
IP DSLAM
377
specified with subrules having cmptype as innamedlist or
notinnamedlist. It can only be used for mapping to create genlist of
an interface.
Value Type
This field specifies the value type of list. Value type should match
value type of subrule field for which comparsion type is
innamedlist or notinnamedlist. It should be 'U32' in case a rule
containing IP subrule or Generic subrule with comparision type
(srcaddrcmp / gencmp) as 'ingenlist' or 'notingenlist' is attached on
same interface. Currently only 'U32' value is supported.
5.13.19 Filter namedlist map Commands
5.13.19.1 Get filter namedlist map
Description:
Use this command to get.
Command Syntax:
get filter namedlist map [ifname <interface-name>]
5.13.19.2 Create filter namedlist map
Description:
Use this command to create.
Command Syntax:
create filter namedlist map ifname <interface-name> listid <listid-val>
5.13.19.3 Delete filter namedlist map
Description:
Use this command to delete.
Command Syntax:
delete filter namedlist map ifname <interface-name>
Parameter:
Name Description
ifname <interface-name>
This specifies the eoa ,pppoe, ipoe or ethernet interface to
which named generic list is attached. Valid values for the field
are between EOA-0 and EOA-23 or between eth-0 and eth-1or