Filter
Top Products
IDL series User Guide
326
Configured Speed
The Ethernet speed for the net-side interfaces.
Mgmt VLAN Index
This parameter specifies the VLAN (C-Vlan) for
management traffic on this interface. Non-zero value of this
field is valid only if either 'ip' field is non-zero or 'usedhcp'
field is true. If no Management VLAN id is specified (in the
create operation) or its value is set to zero (either in create
or modify operation), then the system shall use the value of
'portvlanid' associated with the bridge port created on this
interface as the Management VLAN Index. In case the
management VLAN (i.e. 'mgmtvlanid' or the associated
'portvlanid', if 'mgmtvlanid' is zero) does not exist on the
system, then IP-based management on this management
VLAN shall not happen on the interface till the
corresponding VLAN is created with the Net-side port as its
member. In stacked-VLAN mode, the VLAN filtering
mentioned above is based on virtual-VLAN mapped to
C-Vlan and S-Vlan for the frame.
Mgmt S-VLAN Index
This parameter specifies the S-VLAN for management
traffic on this interface. It is applicable only in stacked-VLAN
Mode. Non-zero value of this field is valid only if either
'etherIfIpAddress' field is non-zero or 'etherUseDhcp' field is
true. If no management S-Vlan id is specified (in the create
operation) or its value is set to zero (either in create or
modify operation), then the system shall use the value of
'psvlanid' associated with the bridge port created on this
interface as the management VLAN id. In case the
management VLAN (virtual VLAN mapped to S-VLAN and
C-VLAN for the frame) does not exist (ie. Virtual VLAN
mapped to 'mgmtsvlanid' or the associated 'psvlanid', if
'mgmtsvlanid' is zero) on the system, then IP-based
management shall not happen on the interface till the
corresponding virtual-VLAN is created with the Net-side
port as its member.
Tagged Mgmt PDU Prio
This parameter specifies the priority to be set in Tagged
Ethernet PDUs sent on Management VLAN over this
interface. This field is valid only if either 'ip' field is non-zero
or 'usedhcp' field is true. In Native-VLAN mode, this priority
shall be used for C-Vlan tag, while in stacked-VLAN mode it
shall be used for S-Vlan tag.
ProfileName
This parameter specifies the scheduling profile to be
associated with the Ethernet interface.