Filter
Top Products
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
221
- Immediate leave does not apply to multicast groups which have been statically assigned to a port.
Figure 4-9-12 MVR Port Configuration page screenshot
The page includes the following fields:
Object Description
The following interface types are supported:
-Source
An uplink port that can send and receive multicast data for the
groups assigned to the MVR VLAN. Note that the source port must
be manually configured as a member of the MVR VLAN (see
“Adding Static Members to VLANs (VLAN Index)” ).
-Receiver
A subscriber port that can receive multicast data sent through the
MVR VLAN. Any port configured as an receiver port will be
dynamically added to the MVR VLAN when it forwards an IGMP
report or join message from an attached host requesting any of the
designated multicast services supported by the MVR VLAN.
-Non-MVR
An interface that does not participate in the MVR VLAN.
• MVR Type
Default type : Non-MVR
• Immediate Leave
Configures the switch to immediately remove an interface from a multicast
stream as soon as it receives a leave message for that group.
(This option only applies to an interface configured as an MVR receiver.)
• Trunk
Shows if port is a trunk member.