Filter
Top Products
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
599
Console(config)#lldp holdtime-multiplier 10
Console(config)#
lldp medFastStartCount
This command specifies the amount of MED Fast Start LLDPDUs to transmit during the activation process of the LLDP-MED
Fast Start mechanism.
Syntax
lldp medfaststartcount packets seconds - Amount of packets. (Range: 1-10 packets; Default: 4 packets)
Default Setting
4 packets
Command Mode
Global Configuration
Command Usage
The MEDFastStartCount parameter is part of the timer which ensures that the LLDP-MED Fast Start mechanism is active
for the port. LLDP-MED Fast Start is critical to the timely startup of LLDP, and therefore integral to the rapid availability of
Emergency Call Service.
Example
Console(config)#lldp medfaststartcount 6
Console(config)#
lldp notification-interval
This command configures the allowed interval for sending SNMP notifications about LLDP MIB changes. Use the no form to
restore the
Default Setting.
Syntax
lldp notification-interval seconds
no lldp notification-interval seconds - Specifies the periodic interval at which SNMP notifications are sent.
(Range: 5 - 3600 seconds)
Default Setting
5 seconds
Command Mode
Global Configuration
Command Usage
This parameter only applies to SNMP applications which use data stored in the LLDP MIB for network monitoring or