Filter
Top Products
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
356
Console(config)#
5.5.2 Banner Information Commands
These commands are used to configure and manage administrative information about the switch, its exact data center location,
details of the electrical and network circuits that supply the switch, as well as contact information for the network administrator
and system manager. This information is only available via the CLI and is automatically displayed before login as soon as a
console or telnet connection has been established.
Command Function Mode
banner configure
Configures banner information displayed before login GC
banner configure company
Configures Company information displayed by the banner GC
banner configuredc-powerinfo
Configures DC Power information displayed by the banner GC
banner configuredepartment
Configures Department information displayed by the banner GC
banner configureequipment-info
Configures Equipment information displayed by the banner GC
banner configureequipment-location
Configures Equipment Location information displayed by
thebanner
GC
banner configureip-lan
Configures IP and LAN information displayed by the banner GC
banner configurelp-number
Configures LP Number information displayed by the banner GC
banner configure manager-info
Configures Manager contact information displayed by
thebanner
GC
banner configure mux
Configures MUX information displayed by the banner GC
banner configure note
Configures miscellaneous information displayed by the banner
under the Notes heading
GC
show banner
Displays all banner information NE, PE
Table 5-8 Banner Commands
banner configure
This command is used to interactively specify administrative information for this device.
Syntax
banner configure
Default Setting
None
Command Mode
Global Configuration
Command Usage
The administrator can batch-input all details for the switch with one command. When the administrator finishes typing the