User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
388
Password Threshold: 3 times
Interactive Timeout: 65535 sec
Login Timeout: Disabled
Silent Time: Disabled
Baudrate: 9600
Databits: 8
Parity: None
Stopbits: 1
VTY Configuration:
Password Threshold: 3 times
Interactive Timeout: 300 sec
Login Timeout: 1 sec
console#
5.7 Event Logging Commands
This section describes commands used to configure event logging on the switch.
Command Function Mode
logging on Controls logging of error messages GC
logging history Limits syslog messages saved to switch memory based on
severity
GC
logging host Adds a syslog server host IP address that will receive logging
messages
GC
logging facility Sets the facility type for remote logging of syslog messages GC
logging trap Limits syslog messages saved to a remote server based on
severity
GC
clear log Clears messages from the logging buffer PE
Table 5-14 Event Logging Commands
logging on
This command controls logging of error messages, sending debug or error messages to switch memory. The no form disables
the logging process.
Syntax
[no] logging on