Filter
Top Products
18
2. Configuring NAT or Bridge setting:
Bridge Mode:
When working on Bride Mode, the VoIP gateway will use only the LAN setting IP, The VoIP gateway will
use the same LAN IP setting as WAN IP. That means, when Bride mode enable, the WAN connection
setting will be ignored.
NAT mode:
LAN IP Network Configuration
IP Address
Private IP address for connecting to a local private network
(Default: 192.168.0.1)
Subnet Mask
Netmask for the local private network
(Default: 255.255.255.0)
3. VoIP Call Protocol Setup
STEP1 : Configure VoIP Call Signal Protocols :
User could select either H.323 or SIP Protocol, and click “select”